Original Article: Implementasi Biodiesel di PLTD
Power generation sector consumes diesel fuel in moderate amount about 3 million kilo-litre per year. This number equals to 10 percent of national diesel fuel consumption. Therefore, the implementation of biodiesel in power generation sector especially in diesel power plant needs special attention. For that reason, BTBRD studies and research on topic "Developing Standard and Characterization of Biodiesel blend B30 for power generation sector". Related to these activities, surveys and field visits to diesel power plant were carried out in various areas of operations of PT PLN, i.e. NTT (representing East region of Indonesia), Barito (representing middle region of Indonesia), as well as the Bangka-Belitung (representing West region of Indonesia).
Some field fact were found from those visits, such as the importance of checking the fuel quality and specification as well as the importance of socialization and implementation related to the handling and storing of biodiesel blend. In handling and storing biodiesel blend, biodiesel characteristics must be taken into consideration, particularly related to its solvent nature. Solvent nature from biodiesel capable of dissolving the dirt in the tank or fuel lines that can carried over into the filter. Filter blockage may occur at the beginning of use, especially if the tank and fuel lines are very dirty and not cleaned first before migration from diesel fuel to biodiesel. In addition, it is necessary to ensure the compatibility of diesel engine with the use of biodiesel and its blend.
Hopefully, with this visit, field data to develop recommendations for biodiesel blend standards and handling guide can be obtained so that the implementation of biodiesel in the power generation sector can run smoothly.
Sebelum pengujian kondisi sampel dalam kemasan harus dijaga agar hasil pengujian dapat merepresentasikan kondisi sampel yang sesungguhnya. Berikut ini panduan dalam mengemas sampel siap uji.
Secara umum:
Khusus sampel biodiesel/biofuel
khusus sampel solar/B-XX
Total Acid Number (TAN) atau bilangan asam total atau angka asam merupakan parameter dalam karakteristik bahan bakar yang merupakan gabungan antara asam-asam lemah maupun asam kuat yang terdapat dalam bahan bakar. Bilangan asam yang tinggi akan mempengaruhi tingkat keasaman dan korosifitas bahan bakar. Hal ini dapat berpengaruh terhadap material yang bersinggungan langsung dengan bahan bakar tersebut misalnya perpipaan, tangki, gasket, pompa, nozzle, maupun ruang bakar. Parameter TAN ini disyaratkan dalam spesifikasi bahan bakar solar 48 (sesuai Surat Keputusan Dirjen Migas No 28.K/10/DJM.T/2016) maupun Spesifikasi B100/biodiesel sesuai SK Dirjen EBTKE No 332 K/10/DJE/2018. Pengujian TAN atau bilangan asam dapat menggunakan metode ASTM D 664.
Kebutuhan impor minyak mentah yang diperkirakan sebesar 400 ribu barrel per hari menyebabkan tidak hanya ketergantungan pada impor namun juga menyedot devisa negara kita. Di lain pihak, biomassa sawit tersedia dalam jumlah yang sangat besar dan apabila diolah menjadi bio-crude oil berpotensi mengganti BBM yang ada.
BPPT melalui unit Balai Bahan Bakar dan rekayasa Design, PTSEIK dalam kedeputian TIEM, berupaya menghasilkan bio-crude oil dari residu biomassa sawit seperti pelepah, tandan kosong menggunakan teknologi fast pyrolysis. Fasilitas ini telah dijadikan sebagai pilot plant semenjak tahun 2016. Menanggapi panggilan bapak presiden akan perlunya penerapan penuh biofuel 100 persen, BPPT berupaya menjadikan rintisan riset ini sebagai flagship kegiatan Greenfuel di mana bahan bakar nabati dapat diperoleh semuanya dari biomassa tanpa harus bersaing dengan kebutuhan minyak nabati untuk pangan.
Page 1 of 5